Traditional Rotators Use Two Motors Driving Wheels Synchronous
Rolling for Tanks Round Seam Welding
Our factory design and build conventional rotators from 1 Ton Pipe
Rotators to 500 Ton tank rotators. This simple design allows a
smooth rotation of a vessel during welding. Special rotators are
supplied for the rotation of power generation equipment during
manufacture. If you want to know more details in the welding fields
, please contact us to discuss your needs further.
1. Consist : One powered roller , One idler roller , Electric
2. Adjust way : Adjust the pipe diameter 700 - 5500 mm
3. Voltage : 110V - 600 V 50 / 60 Hz 1P / 3P all available
4. Control Way : Remote hand control box / Wireless hand control
5. Roller Material : Rubber / Steel / PU ( Polyurethane roller for
Nonferrous Metals )
6. Original : Our factory / Wuxi China
Attention more If you have any more special requirements
1. Movable rotators can auto move on the rails for the third single
pipe butt welding.
2. It will be controled by Hand Remote Control Box or Wireless
3. During two single pipes butting , the position could not butt
well sometimes,our rotators can adjust the butt position up or down
left or right to realize the perfect butt position.
4. Two self aliging rollers in the two end, and two hydrulic adjust
rollers in the middle to adjust the butt positon.
Specification of Conventional Rotator
1. For pipe support and turning for auto seam welding
2. To make wind tower
3. For auto circle seam welding
4. Controlled by foot pedal / hand control box
More Questions Customers May Concerned
Q : What about the transportion?
A : 1. Fully packaged in wooden case to anti damage during the
transportational process .
2. Usually we take seaway ,cause its more convenient and cheaper
for big machine.
3. Door to door delivery service is also available.
Q : What is your warranty and after sale service ?
A : 1. All our equipments with One Year Warranty time , fully test
at our work shop before delivery.
2. If you have any questions on the installation , you will get our
engineers respond within 24 hours.
Details Control system and Brand
1. Inverter is from Taida / Yaskawa Brand
2. Motor is from CE Invertek Brand
3. Reducer is from Cable. Made in China.
4. Electric system is from Schneider
1. Normally under 60 T model we use the Rubber material rollers ,
upper we use Steel material rollers.
2. If your work piece material is Nonferrous Metals , we suggest PU
3. Self-aligning welding rotator / Bolt adjsutment / Lead Screw
adjustment / Fit up rotators all available.
DO NOT HESITATE ! JUST SEND US YOUR INQUIRY NOW.